http://192.168.1.233/#/Dashboard
System
Miner Type Antminer L3+ (vnish 3.8.8)
Hostname L3
OS GNU/Linux
Hardware Version Socket connect failed: Connection refused
Kernel Version Linux 3.8.13 #22 SMP Tue Dec 2 15:26:11 CST 2014
File System Version Thu Feb 4 16:09:47 CST 2021
CGMiner version
Uptime 41
Load Average 0.01, 0.02, 0.04
Memory
Total Available
46364 kB /251180 kB (18%)
Free
204816 kB /251180 kB (81%)
Cached
0 kB /251180 kB (0%)
Buffered
0 kB /251180 kB (0%)
Network
IP Status
Type: DHCP
IP: 192.168.1.233
Netmask: 255.255.255.0
Gateway:
DNS:

http://192.168.1.233/#/kernellog
Nov 27 00:42:42 (none) local0.err cgminer: Miner compile time: Thu Feb 4 16:09:47 CST 2021 type: Antminer L3+ (vnish 3.8.8)
Nov 27 00:42:42 (none) local0.warn cgminer: Started cgminer 4.11.1
Nov 27 00:42:42 (none) local0.notice cgminer: Pool checking..
Nov 27 00:42:42 (none) local0.warn cgminer: Succeeded pool 0
Nov 27 00:42:43 (none) local0.warn cgminer: Succeeded pool 1
Nov 27 00:42:44 (none) local0.warn cgminer: Succeeded pool 2
Nov 27 00:42:45 (none) local0.warn cgminer: Failed to resolve (?wrong URL) ltc.viabtc.com:3333

http://192.168.1.233/#/systemlog
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 239584k/239584k available, 22560k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000352] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015439] pid_max: default: 32768 minimum: 301
[ 0.015670] Security Framework initialized
[ 0.015765] Mount-cache hash table entries: 512
[ 0.024600] Initializing cgroup subsys cpuacct
[ 0.024633] Initializing cgroup subsys memory
[ 0.024695] Initializing cgroup subsys blkio
[ 0.024829] CPU: Testing write buffer coherency: ok
[ 0.025404] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.025481] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.026805] Brought up 1 CPUs
[ 0.026829] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.028122] devtmpfs: initialized
[ 0.092542] pinctrl core: initialized pinctrl subsystem
[ 0.092758] rstctl core: initialized rstctl subsystem
[ 0.093254] regulator-dummy: no parameters
[ 0.093824] NET: Registered protocol family 16
[ 0.094527] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.104191] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[ 0.104372] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.105460] platform 49000000.edma: alias fck already exists
[ 0.105495] platform 49000000.edma: alias fck already exists
[ 0.105523] platform 49000000.edma: alias fck already exists
[ 0.106676] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.106858] OMAP GPIO hardware version 0.1
[ 0.108260] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.109585] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.110898] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.111534] of_get_named_gpio_flags exited with status 52
[ 0.111565] gpio-rctrl rstctl.3: loaded OK
[ 0.116677] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.119886] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122066] cpsw.0: No hwaddr in dt. Using 64:cf:d9:89:b0:37 from efuse
[ 0.122098] cpsw.1: No hwaddr in dt. Using 64:cf:d9:89:b0:39 from efuse
[ 0.137654] bio: create slab at 0
[ 0.149785] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.150032] of_get_named_gpio_flags: can't parse gpios property
[ 0.150324] vmmcsd_fixed: 3300 mV
[ 0.153439] SCSI subsystem initialized
[ 0.153896] usbcore: registered new interface driver usbfs
[ 0.154010] usbcore: registered new interface driver hub
[ 0.154342] usbcore: registered new device driver usb
[ 0.156452] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[ 0.156486] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.156682] media: Linux media interface: v0.10
[ 0.156779] Linux video capture interface: v2.00
[ 0.156896] pps_core: LinuxPPS API ver. 1 registered
[ 0.156912] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.157634] Advanced Linux Sound Architecture Driver Initialized.
[ 0.158825] Switching to clocksource gp_timer
[ 0.176835] NET: Registered protocol family 2
[ 0.177830] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.177920] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[ 0.178010] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.178101] TCP: reno registered
[ 0.178128] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178174] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178667] NET: Registered protocol family 1
[ 0.179253] RPC: Registered named UNIX socket transport module.
[ 0.179273] RPC: Registered udp transport module.
[ 0.179286] RPC: Registered tcp transport module.
[ 0.179300] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.179689] Trying to unpack rootfs image as initramfs...
[ 1.847736] Freeing initrd memory: 11332K
[ 1.848483] CPU PMU: probing PMU on CPU 0
[ 1.848515] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 1.849051] omap2_mbox_probe: platform not supported
[ 1.852911] VFS: Disk quotas dquot_6.5.2
[ 1.853150] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.854534] NFS: Registering the id_resolver key type
[ 1.854648] Key type id_resolver registered
[ 1.854666] Key type id_legacy registered
[ 1.854731] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.855189] msgmni has been set to 490
[ 1.857983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.858009] io scheduler noop registered
[ 1.858025] io scheduler deadline registered
[ 1.858082] io scheduler cfq registered (default)
[ 1.862005] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.864605] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 1.864893] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.525703] console [ttyO0] enabled
[ 2.530280] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[ 2.538938] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[ 2.547622] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[ 2.556253] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[ 2.565298] [drm] Initialized drm 1.1.0 20060810
[ 2.583935] brd: module loaded
[ 2.594186] loop: module loaded
[ 2.598415] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[ 2.608395] nand_get_flash_type: 2c,f1 against 2c,f1
[ 2.613900] ONFI param page 0 valid
[ 2.617571] ONFI flash detected
[ 2.620896] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64
[ 2.632807] omap2-nand: detected x8 NAND flash
[ 2.637472] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 2.643053] omap2-nand: using custom ecc layout
[ 2.647897] 10 ofpart partitions found on MTD device omap2-nand.0
[ 2.654292] Creating 10 MTD partitions on "omap2-nand.0":
[ 2.659972] 0x000000000000-0x000000020000 : "spl"
[ 2.666792] 0x000000020000-0x000000040000 : "spl_backup1"
[ 2.674200] 0x000000040000-0x000000060000 : "spl_backup2"
[ 2.681627] 0x000000060000-0x000000080000 : "spl_backup3"
[ 2.689066] 0x000000080000-0x000000240000 : "u-boot"
[ 2.697299] 0x000000240000-0x000000260000 : "bootenv"
[ 2.704231] 0x000000260000-0x000000280000 : "fdt"
[ 2.710856] 0x000000280000-0x000000780000 : "kernel"
[ 2.721879] 0x000000800000-0x000001c00000 : "root"
[ 2.745372] 0x000001c00000-0x000003000000 : "config"
[ 2.769145] OneNAND driver initializing
[ 2.774899] usbcore: registered new interface driver asix
[ 2.780713] usbcore: registered new interface driver cdc_ether
[ 2.786960] usbcore: registered new interface driver smsc95xx
[ 2.793080] usbcore: registered new interface driver net1080
[ 2.799107] usbcore: registered new interface driver cdc_subset
[ 2.805431] usbcore: registered new interface driver zaurus
[ 2.811437] usbcore: registered new interface driver cdc_ncm
[ 2.818152] usbcore: registered new interface driver cdc_acm
[ 2.824114] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.832492] Initializing USB Mass Storage driver...
[ 2.837737] usbcore: registered new interface driver usb-storage
[ 2.844038] USB Mass Storage support registered.
[ 2.849083] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.855799] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 2.861041] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.869816] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.869865] musb-hdrc: MHDRC RTL version 2.0
[ 2.869881] musb-hdrc: setup fifo_mode 4
[ 2.869909] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.870057] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 2.875099] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 2.881122] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 2.886379] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.895150] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.895170] musb-hdrc: MHDRC RTL version 2.0
[ 2.895184] musb-hdrc: setup fifo_mode 4
[ 2.895206] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.895372] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 2.900413] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 2.905722] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 2.912094] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 2.920337] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 2.920440] usb usb1: default language 0x0409
[ 2.920497] usb usb1: udev 1, busnum 1, minor = 0
[ 2.920522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.927649] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.935220] usb usb1: Product: MUSB HDRC host driver
[ 2.940435] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 2.946103] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 2.952094] usb usb1: usb_probe_device
[ 2.952122] usb usb1: configuration #1 chosen from 1 choice
[ 2.952187] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.952386] hub 1-0:1.0: usb_probe_interface
[ 2.952408] hub 1-0:1.0: usb_probe_interface - got id
[ 2.952436] hub 1-0:1.0: USB hub found
[ 2.956433] hub 1-0:1.0: 1 port detected
[ 2.960570] hub 1-0:1.0: standalone hub
[ 2.960591] hub 1-0:1.0: individual port power switching
[ 2.960609] hub 1-0:1.0: no over-current protection
[ 2.960627] hub 1-0:1.0: Single TT
[ 2.960648] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.960668] hub 1-0:1.0: power on to power good time: 10ms
[ 2.960724] hub 1-0:1.0: local power source is good
[ 2.960841] hub 1-0:1.0: enabling power on all ports
[ 2.961943] mousedev: PS/2 mouse device common for all mice
[ 2.969886] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 2.977640] i2c /dev entries driver
[ 2.982653] pps_ldisc: PPS line discipline registered
[ 2.988142] Driver for 1-wire Dallas network protocol.
[ 2.995374] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.003243] cpuidle: using governor ladder
[ 3.007587] cpuidle: using governor menu
[ 3.012158] of_get_named_gpio_flags exited with status 6
[ 3.012179] of_get_named_gpio_flags: can't parse gpios property
[ 3.012196] of_get_named_gpio_flags: can't parse gpios property
[ 3.012232] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 3.019468] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 3.026338] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 3.033556] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 3.040899] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 3.047878] omap_hsmmc mmc.4: pins are not configured from the driver
[ 3.061371] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 3.081409] of_get_named_gpio_flags exited with status -517
[ 3.081478] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.089250] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.096032] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 3.103226] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.111309] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 3.117654] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 3.124837] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 3.137095] usbcore: registered new interface driver usbhid
[ 3.143017] usbhid: USB HID core driver
[ 3.149908] TCP: cubic registered
[ 3.153438] Initializing XFRM netlink socket
[ 3.157994] NET: Registered protocol family 17
[ 3.162859] NET: Registered protocol family 15
[ 3.167733] Key type dns_resolver registered
[ 3.172378] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 3.180491] ThumbEE CPU extension supported.
[ 3.185002] Registering SWP/SWPB emulation handler
[ 3.191026] registered taskstats version 1
[ 3.197625] of_get_named_gpio_flags exited with status -517
[ 3.197697] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.254684] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.261093] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.275654] libphy: 4a101000.mdio: probed
[ 3.279970] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.290204] Detected MACID = 64:cf:d9:89:b0:37
[ 3.294893] cpsw 4a100000.ethernet: NAPI disabled
[ 3.300283] of_get_named_gpio_flags exited with status -517
[ 3.300349] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.309069] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.318353] cpu0 supply cpu0 not found, using dummy regulator
[ 3.324846] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.330678] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.343482] ALSA device list:
[ 3.346715] No soundcards found.
[ 3.351268] Freeing init memory: 264K
[ 3.355315] Failed to execute /init
[ 4.283295] jffs2: Empty flash at 0x01260d24 ends at 0x01261000
[ 4.346593] jffs2: Empty flash at 0x012634d0 ends at 0x01263800
[ 4.402848] jffs2: Empty flash at 0x01266da0 ends at 0x01267000
[ 4.486111] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 7.455199] omap_elm_correct_data
[ 7.988547] net eth0: initializing cpsw version 1.12 (0)
[ 7.997457] net eth0: phy found : id is : 0x7c0f1
[ 8.005280] libphy: PHY 4a101000.mdio:01 not found
[ 8.010488] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 11.075537] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 14.841857] omap_elm_correct_data
[ 15.736656] jffs2: notice: (123) check_node_data: wrong data CRC in data node at 0x0132fae0: read 0x7950965a, calculated 0xee721340.
[ 16.005787] omap_elm_correct_data
[ 16.384070] omap_elm_correct_data

////
----

txtapk.com

translate-přeložit

2023-03-24-bip39-standalone.html

jeden krucek

ssssssssssssss

Příklad stránky s odkazy

ssssssssssssss